If paper is not automatically ejected in the situations noted below, a paper jam may have occurred inside the printer.
❏The printer is turned on or the cover is opened when the Roll paper mode is Off.
❏You press the F1/Eject button in the ESC/P or IBM PPDS mode.
Follow the steps noted below to clear the paper jam.
wWarning:
If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it.
1.Turn off the printer.
cCaution:
Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.
2.Open the cover and press the release lever to move the upper mechanism. Then hold the jammed paper with both hands and pull it out of the printer. If you can clear the paper jam, move the upper mechanism to its original position by pulling the release lever and then close the printer cover. If it is difficult to do that, go to the next step.
cCaution:
Make sure that you move the upper mechanism by pulling the release lever. Do not pull the mechanism by hand. It may damage the printer.
Chapter 6 Problem Solver | 119 |