2.Position the roll paper holder underneath the printer as shown below. Fit the two positioning pegs on the bottom of the printer into the two holes in the base plate.
cCaution:
The roll paper holder is not fastened to the printer; only the printer’s weight and the two positioning pegs hold it in place. If you pick up the printer, be careful not to drop the roll paper holder.
Loading roll paperFollow these steps to load a roll of paper after you install the roll paper holder:
1.Make sure the printer is turned off.
2.Cut the leading edge of the roll paper straight across.
Chapter 7 Options and Consumables | 140 |