Magnetic standard
You can select the magnetic standard in this setting.
This feature is available only for
End sentinel
You can select C or F as the letter which will be attached to the end of the data recorded on magnetic stripes.
This setting is effective only when the format for IBM3604 or IBM4746 is selected in the Magnetic standard setting.
This feature is available only for
Displacement
This option allows you to select the displacement value of the magnetic stripe.
This feature is available only for
Duplicate
When this feature is set to On, the magnetic stripes record the data in duplicate.
This feature is available only for
Retry
This setting allows you to set the number of times the printer tries to receive data before it fails.
This feature is available only for
Chapter 5 Control Panel | 90 |