DSR (PR2)
When you select On, DSR (Data Set Ready) is activated.
This option is available only in the PR2 mode.
DCD (PR2)
When you select On, DCD (Data Carrier Detector) is activated.
This option is available only in the PR2 mode.
Passbook
When you use single sheet or passbook, set this option to On. When you use multipart forms, set this option to Off.
Binding
You need to set the method for binding when you use a passbook. Select Horizontal for a
Thin paper
When you use thin paper, activated when you select Off.
set this option to On. This mode is On and the Passbook mode is set to
Buzzer
If you set this feature to On, the printer beeps when an error occurs. See “Using the error indicators” on page 99 for more information on printer errors. If you do not want the printer to beep, select Off.
Chapter 5 Control Panel | 84 |