The following table shows the basic function of each button in the default setting mode.
Button | Basic function |
|
|
F1/Eject | Selects the next menu parameter. |
|
|
Offline | Selects the previous menu parameter. |
|
|
F2 | Changes the value in the selected menu. |
|
|
Follow these steps to enter the
Note:
❏Prepare an A4 size sheet of paper before entering the default setting mode.
❏You need to load a new sheet of paper each time the printer ejects a printed sheet from the front slot.
❏Always close the printer cover before printing. The printer does not print when the printer cover is open.
1.Turn off the printer.
cCaution:
Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.
2.Turn on the printer while holding the F1/Eject and F2 buttons on the control panel.
Chapter 5 Control Panel | 94 |