When loading paper
❏Use passbooks and paper that have more than 60% reflectance.
❏When you use a passbook, set Passbook mode to On and set Binding mode to the method for the passbook’s binding in the default settings mode.
❏Do not load passbooks that are creased or have ripped seam.
❏Do not use a passbook that has any metallic parts such as staplers or metal clips.
❏Do not use a passbook with sticky parts such as stamps or seals.
❏Do not use a passbook that has any pages smaller than the cover page.
❏Do not print on the front or back cover of a passbook. Printing can be done only when the passbook is opened.
❏When you use paper that is shorter than 110.0 mm, set the paper eject direction to front. The factory set default is front. Refer to the Programming Guide for details.
❏Do not insert paper that is curled or has been folded into the slot when you load it.
❏Do not punch holes in the area from 25.0 to 40.0 mm from the left edge of paper.
When operating the printer
❏Avoid using or storing the printer in places subject to rapid changes in temperature and humidity. Keep it away from direct sunlight, strong light, heat sources or excessive moisture or dust.
Chapter 2 Safety Instructions | 24 |