3.When the Ready light turns on, insert a sheet of A4 paper into the front slot. The printer prints the version number and the language selection for the default settings menu. The underline shows the selected language. Select the language by pressing the F1/Eject button.
4.Press the F2 button to set the language. The printer prints a message asking if you wish to print the current settings. If you wish to print the current settings, press the F2 button. The printer prints the current settings. The underline shows the setting value that is currently selected for each item. You can also bypass printing the current setting by pressing the F1/Eject button.
5.The printer prints the setting method and the first selection of the main setup menu.
Common Settings menu
PR2 Mode Settings menu
Other Emulation Settings menu
You can select the main setup menu by pressing F2. Then press the F1/Eject to set it.
6.Select the menu parameters which you wish to change by pressing the F1/Eject button (for the next item) or the Offline button (for the previous item). The printer prints the item and the current setting value of that item is underlined.
7.Press the F2 button to change the value and the printer prints the next value.
8.You may either continue to make changes to other parameters by pressing the F1/Eject or Offline button.The menu selection will return to the selection of the three main setup menus after the selection of the last parameter on each menu is done.
Chapter 5 Control Panel | 95 |