Note:
When you press the Offline button at the first item selection of each menu, the menu selection will also return to the main setup menu selection.
9.After you finish the default setting, turn off the printer to exit the default setting mode.
Aligning Vertical Lines in Your PrintoutIf you notice that the vertical lines in your printout are not properly aligned, you can use the printer’s bidirectional adjustment mode to correct this problem.
During bidirectional adjustment, the printer prints three sheets of alignment patterns, labeled Draft, Bit image (ESC * 26H), and LQ (letter quality). As described below, you select the best alignment pattern from each sheet.
Note:
Prepare an A4 size sheet of paper before entering the bidirectional adjustment mode.
Follow these steps to perform the bidirectional adjustment:
1.Turn off the printer.
cCaution:
Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.
2.Turn on the printer while holing the F2 button.
3.Press the F1/Eject button while the F1/Eject, Offline, and F2 lights are flashing.
Chapter 5 Control Panel | 96 |