❏The examples in the following section are from the Windows 98 operating system. They may vary in appearance from what actually appears on your screen; however, the instructions are the same.

1.Make sure that the printer is turned off, then insert the User CD-ROM into the CD-ROM drive. The SOFTWARE LICENSE AGREEMENT dialog box appears.

Note:

If the SOFTWARE LICENSE AGREEMENT dialog box does not appear, double-click Epsetup.exe in the CD-ROM.

2.Read the license agreement. If you agree with the terms, click

Agree.

3.Click the name of the printer that you have.

4.Click Install and then follow the on-screen instructions.

5.When prompted, insert your Windows CD-ROM, and click

OK.

When the Windows installation screen is displayed, close the screen to continue with the driver installation.

Note:

❏If your PC shipped with Windows pre-installed, Setup may complete without requiring the Windows CD-ROM, and your printer is ready to use.

❏If you receive a message saying the drive is not accessible, click Cancel and try again.

❏If you are using Windows NT, go to step 7.

Chapter 1 Setting up the Printer

15