Position your printer’s power cord and interface cable so they do not interfere with paper feeding. If possible, secure the cables to a leg of the printer stand.

When maintaining the printer

❏Unplug the printer before cleaning it, and always clean it with a piece of damp cloth only.

❏Do not spill liquid onto the printer.

❏Except as specifically explained in this guide, do not attempt to service the printer yourself.

❏Unplug the printer and refer servicing to qualified service personnel under the following conditions:

i.If the power cord or plug is damaged.

ii.If liquid has entered the printer.

iii.If the printer has been dropped or the cabinet damaged.

iv.If the printer does not operate normally or exhibits a distinct change in performance.

❏Adjust only those controls that are covered by the operating instructions.

❏If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a 10- or 16-amp circuit breaker.

Chapter 2 Safety Instructions

23