Extreme Networks Px Series manual Show health Information, Column Description

The following tables describe the columns and their values.

Table 10-3: show health Information

Column Description

index The index number of the server or service.

IP The IP address of the server or service.

port The port for a virtual service. For servers, no value is shown. proto The protocol in use on the server or service.

state The current state of the server or service, UP or DOWN. For a service, the value is preceded by an asterisk (*), and the value indicates whether the service is running.

check What the check is currently doing.

■SYN-SENT (TCP and HTTP health checks)

■REQ-SENT (applies to TCP and HTTP health checks)

■IDLE

■PINGING (ping sent, waiting for response)

left The number of seconds left until the next health check.

run When positive, the number of consecutive check passes, up to the restore-after value.

When negative, the number of consecutive check failures, up to the fail-after value.

ra The configured restore-after value.

fa The configured fail-after value.

ups The number of state changes since power-on.

flg The configured flags.

■E = checks enabled

■D = checks disabled

■R = MAC address of server is resolved.

Table 10-4: show	server details Information
Column	Description
index	The index number of the server or service.
IP	The IP address of the server or service.
port	The port for a virtual service. For servers, no value is shown.
proto	The protocol in use on the server or service.

10-6 Px Series Application Switch Installation and Configuration Guide