Extreme Networks Px Series manual Following commands configure all system-related facilities

Example Configuration

The following commands configure all system-related facilities:

#----------------------------------------------------------------

# system configuration

#----------------------------------------------------------------

config system-ip 64.1.1.10 / 24 config default-gateway 64.1.1.1 disable vlan

config mgmt ipaddress 10.10.10.10 / 24 enable syslog

config syslog ip 10.10.10.20 config nat-mode full enable clipaging

disable port gigabit

#----------------------------------------------------------------

# proxy-ip's

#----------------------------------------------------------------

config proxy-ip 64.1.1.11 - 64.1.1.42

#----------------------------------------------------------------

# SNMP configuration

#----------------------------------------------------------------

config snmp sysName “balancer”

config snmp sysLocation “Exodus Colo” config snmp sysContact “Web Admin”

config add trap receiver 10.10.10.21 “public” 162 config snmp add community readonly “readme” config snmp add community readwrite “doall”

Px Series Application Switch Installation and Configuration Guide 4-19