Extron electronic 84, 124 23 - Select RGBHV or video and audio, 24 - Select an input, Rgbhv Audio

Operation, cont’d

2.	Press and release the View button to enter View-onlymode. The View LED
	lights.
3.	To select both video and audio for viewing, if necessary, press and release the
	RGBHV button and the Audio button (figure 3-23).
		I/O	In this example, the Audio LED blinks to
			indicate audio breakaway (assuming you
			have performed example 1, 2, and 3).
	RGBHV AUDIO

Press the RGBHV button to toggle on and off.

The LED lights when selected.

Press the Audio button to toggle on and off.

The LED lights or blinks when selected.

Until you select an input, the buttons for all untied outputs light.

1 2 3 4 5 6 7 8 OUTPUTS

Figure 3-23 — Select RGBHV or video and audio

4. Press and release the input 5 button (figure 3-24).

Press and release the Input 5 button. The LED lights.

The output buttons for outputs that are tied to Input 5, light.

3 4 5 6

1 2 3 4 5 6 7 8

OUTPUTS

The output buttons for outputs not tied to input 5 are unlit.

Figure 3-24 — Select an input

A set of ties can also be viewed by selecting a tied output. To demonstrate this, note the number of a lit output LED, and then press and release the output button for an untied (unlit) output. Observe that all of the untied outputs’ LEDs light. Then press the output button that you noted previously and observe that the selected output LED, the tied input LED (input 5), and the output LEDs light for all of the outputs that are tied to the input.

3-16 CrossPoint 300 Matrix Switchers • Operation