Extron electronic 124, 84, 1616, 1212, 168 Selecting Lock mode 2 or toggling between mode 2 and mode

Basic features consist of:

Making ties

Saving and recalling presets

Setting input audio gain and attenuation

Changing Lock modes

Advanced features consist of:







Setting video and audio output mutes Setting audio output volume

Setting the rear panel remote port protocol and baud rate

The switcher ships from the factory in Lock mode 2.

Selecting Lock mode 2 or toggling between mode 2 and mode 0

If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. If the switcher in in Lock mode 2, this procedure selects mode 0 (unlocks the switcher).

To toggle the lock on and off, press and hold the Enter button, the RGBHV button, and the Audio button for approximately two seconds (figure 3-56).

Press and hold the Enter, RGBHV, and Audio buttons simultaneously to turn on Lock mode 2 or to toggle between mode 2 and mode 0.

I/O	I/O
	2 seconds
ENTER RGBHV AUDIO	ENTER RGBHV AUDIO

The Enter, RGBHV, and Audio LEDs blink twice to indicate the mode change. Release the buttons.

Figure 3-56 — Toggle front panel lock on or off

Selecting Lock mode 2 or toggling between mode 2 and mode 1

If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. If the switcher in in Lock mode 2, this procedure selects mode 1.

To toggle the lock on and off, press and hold the RGBHV button and the Audio button for approximately two seconds (figure 3-57).

Press and hold the RGBHV and Audio buttons simultaneously to turn on Lock mode 2 or to toggle between mode 1 and mode 2.

I/O	I/O
	2 seconds
RGBHV AUDIO	RGBHV AUDIO

The RGBHV and Audio LEDs blink twice to indicate the mode change. Release the buttons.

Figure 3-57 — Toggle front panel lock between mode 2 and mode 1

CrossPoint 300 Matrix Switchers • Operation 3-35