Extron electronic 1212 7 - Select the outputs, Press and release the Enter button figure, Outputs

Operation, cont’d

Press and release the Output 3, Output 4, and Output 8 buttons.

The LEDs blink to indicate that the selected RGBHV and audio input will be tied to these outputs.

1	2	3	4	5	6	7	8	ENTER PRESET
			OUTPUTS					The Enter LED blinks to indicate
								the need to confirm the change.
Figure 3-7 — Select the outputs
5.	Press and release the Enter button (figure 3-8).

Press the Enter button to confirm the configuration change.

The Enter LED and all input LEDs and output LEDs return to the unlit state.

ENTER

Figure 3-8 — Press the Enter button

The current configuration (figure 3-9) is now:

•Input 5 video and audio tied to output 3, output 4, and output 8

Input 5 (video/audio) tied

to outputs 3, 4, and 8.

Input

5

3

4 Output

8 Video Audio

Figure 3-9 — Example 1, final configuration

Example 2: Adding a tie to a set of video and audio ties

The following steps show an example in which a new video tie is added to the current configuration. The steps show the front panel indications that result from your actions.

3-10 CrossPoint 300 Matrix Switchers • Operation