Extron electronic IN1508 manual Remote Control Buttons, Desired buttons on the remote. The maximum

8Enter button — The Enter button:

•Activates a highlighted submenu or function in the IN1508 main menu system.

•Exits a slider-type status indicator bar control.

•Saves a changed value in a selection box control.

See “Main menu system”, on page 3-16, and “Picture adjustments”, on page 3-25, for details.

Remote Control Buttons

To control the switcher with the hand-held

IN1508 Remote control (figure 3-8), aim the hand-held unit at the IR detector on the switcher and press the

desired buttons on the remote. The maximum 9

operating range is 30 feet.

9Picture-In-Picture (PIP) buttons — The PIP

buttons function identically to the front panel PIP	10
buttons. See “Picture-in-picture controls” and 4 ,
on page 3-5.
On/Off button — The PIP On/Off button toggles	11
the PIP function on and off. When lit, the front
panel PIP On LED indicates that the switcher’s
picture-in-picture function is on.	12
Swap button — The PIP Swap button toggles the
primary and secondary pictures between the main
image and the PIP window.	13
If PIP mode is off (the front panel PIP Mode On
LED is off), the Swap function continues to
work, toggling between the most recently
selected low-resolution input and the most
recently selected high-resolution input. Unlike
when PIP mode is on, however, the unselected
input is not displayed in a PIP window.

PIP

ON/OFF

SWAP

5 6 7 8

VIDEO	AUDIO	A/V	FREEZE
MUTE	MUTE	MUTE
	MENU		ENTER

SIZE	CENTER	CONT/	COL/
		BRT	TINT
ZOOM	PAN		ASPECT
			RATIO

SHARP PHASE

IN1508

REMOTE

10 Input Selection buttons — The Input Selection

buttons select an input to scale and output. The	Figure 3-8 — IR
	remote control
front panel Input LEDs indicate the selected input.

The Input Selection buttons function identically to the front panel Input buttons. See “Input controls” and 2 on page 3-3.

11Mute/Freeze buttons — The Mute and Freeze buttons blank the screen and/or silence the audio and freeze the video. Press the buttons to toggle the mutes and freeze mode on and off.

Video Mute — The Video Mute button switches the output to a blank screen. The blank screen is deselected when a new input is selected. On-screen displays are still available when the video is muted.

Video mute mutes the video signals only. Separate H and V sync, composite sync, or sync-on-green (depending on the output format selected) is always output to ensure that the connected display does not lose sync.

Audio Mute — The Audio Mute button silences the audio output. The audio mute is deselected when a new input is selected.

IN1508 Scaling Presentation Switcher • Operation 3-7