Extron electronic IN1508 manual Buttons, Selection boxes and status indicator bars

Menu button — Press the front panel or IR remote control Menu button to activate the menu system or to back up one level from the currently selected submenu or selection. (For example, pressing the Menu button in the Picture submenu turns off the Picture submenu selections and the switcher displays the main menu only.)

, , , and buttons —

Press the front panel or IR remote control , , , and buttons to maneuver around the menu system, highlighting submenus or selections or increasing and decreasing selected picture control settings.

Enter button — Press the front panel or IR remote control Enter button to:

•Activate a highlighted submenu or function in the IN1508 main menu system

•Exit a slider-type status indicator bar control

•Save a changed value in a selection box control

To return to normal operation (no menus), let the switcher remain idle for 20 seconds until the selected screen times out, or press the front panel or IR remote control Menu button repeatedly until the Main Menu is deselected.

Selection boxes and status indicator bars

Most of the menu system selections are made using either on-screen selection box controls (the top example in figure 3-11) or “sliding” status indicator bar controls (the bottom example in figure 3-11). The two types of controls operate differently.

Typical selection box control

No

menu Timeout display

Return to higher level

screen.

Y,B-Y,R-Y
RGBHV
RGBS	Change does not take affect
RGsB	until Enter is pressed to
	activate the selection.

Press Menu or to exit the screen.

	Typical status indicator bar control
		(0 to 128)
	Brightness	+96
	Contrast	+64
No		(0 to 128)	Changes take affect as you
	Timeout		move the slider controls.
menu
display
Return to		Push Menu or Enter
		to exit the screen.
higher level
screen.

Figure 3-11 — Selection box vs. status indicator bar operation

IN1508 Scaling Presentation Switcher • Operation 3-13