Operation, cont’d

Signal Type selection box

The Signal Type selection box identifies the currently selected output signal format (RGBHV, RGBS, RGsB, or progressive component video [Y, B-Y, R-Y]) and provides the ability to select a different type. To select a different sync type, use the front panel or IR remote control or button to highlight the desired sync type and press the enter button. The default setting is RGBHV.

Another way to select the output signal type is to press and hold the PIP On button while you apply power to the switcher. This action toggles the signal type between RGBHV and progressive component video. If RGB was selected the last time the switcher was powered, the signal type switches to component video. If component video was selelected, the signal type switches to RGB.

Audio submenu

Figure 3-16 shows an overview of the Audio submenu, its available selections, and their available settings. Use the front panel or IR remote control and buttons to highlight the desired selection and press the Enter button.

Timeout

Menu

Timeout

Menu

Timeout

Menu

Timeout

Menu

Timeout

No

menu

display

Menu Menu

INPUT

PICTURE

OUTPUT

AUDIO

ADVANCED

Menu

Enter

Menu

Menu

Timeout

Output Volume

Input Gain/Atten

Audio Delay

Timeout

Enter

Enter

Enter

Timeout

 

 

Menu

 

(0 to 100)

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu

 

(-53 dB to +9 dB)

 

 

 

 

 

0 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press Enter to

 

 

 

 

 

Menu

select a change.

 

 

On

Timeout

 

 

 

 

 

 

Off

 

 

 

 

Figure 3-16 — Audio submenu flowchart

Output Volume status indicator bar

The Output Volume status indicator bar shows and allows you to adjust the audio output level (attenuation). Use the front panel or IR remote control and buttons to increase or decrease the volume through a range of 0 to 100. The default setting is 100, that is, no attenuation (full volume).

Input Gain/Attenuation status indicator bar

The Input Gain/Attenuation status indicator bar shows and allows you to adjust the audio level (gain or attenuation) for the selected input. Use the front panel or IR remote control and buttons to increase or decrease the level frequencies through a range of –53 dB to +9 dB. The default setting is 0 dB, no gain or attenuation.

3-22 IN1508 Scaling Presentation Switcher • Operation

Page 45
Image 45
Extron electronic IN1508 manual Signal Type selection box, Audio submenu, Output Volume status indicator bar