Center selection
The Center selection displays two status indicator bars that show, and allow you to adjust, the horizontal and vertical position of the main or
If the PIP feature is turned off (the front panel PIP On LED is unlit), Center adjusts the position of the main window.
If the
The center adjustments do not crop the image or add blank lines.
Use the front panel or IR remote control 
and or vertical (V) centering status indicator bar. control 
and 
buttons to move the image.
buttons to highlight the horizontal (H) Use the front panel or IR remote
Size selection
The Size selection displays two status indicator bars that show, and allow you to adjust, the horizontal and vertical size of the output. Use the front panel or IR remote control 
and 
buttons to highlight the horizontal (H) or vertical (V) size status indicator bar. Use the front panel or IR remote control 
and 
buttons to increase or decrease the size.
Zoom selection
The Zoom selection displays a status indicator bar that allows you to adjust the zoom level of the output. Use the front panel or IR remote control 
and 
buttons to increase or decrease how much zoom (enlargement) is applied to the image.
Pan selection
The Pan selection displays two status indicator bars that allow you to pan (move) horizontally and vertically on a zoomed image. Use the front panel or IR remote control 
and 
buttons to highlight the horizontal (H) or vertical (V) pan status indicator bar. Use the front panel or IR remote control 
and 
buttons to pan left and right or up and down.
Aspect ratio selection
The Aspect ratio selection displays a selection box that shows the currently selected aspect ratio and allows you to select another aspect ratio.
Use the front panel or IR remote control 
and 
buttons to highlight the desired aspect ratio. Press the Enter button to change to the highlighted value. The default is 4:3.
