Brightness status indicator bar
The Brightness status indicator bar shows, and allows you to adjust, the brightness setting for the selected input. Brightness adjusts the light intensity of the image on the screen. Use the front panel or IR remote control 
and 
buttons to adjust the brightness control through a range of 0 to 128. The default setting is 64.
Contrast status indicator bar
The Contrast status indicator bar shows, and allows you to adjust, the contrast setting for the selected input. Contrast adjusts the difference between the input signal’s brightest and darkest settings. Use the front panel or IR remote control
and 
buttons to adjust the contrast through a range of 0 to 128. At the minimum setting, 0, the entire picture is shown at about the same brightness (gray). At the maximum setting, 128, there is a marked difference between the dark and light areas of the image. The default setting is 45 for high resolution inputs and 59 for low resolution inputs.
Color status indicator bar
The color adjustment is available for interlaced component video,
The Color status indicator bar shows, and allows you to adjust, the color setting for the selected input. Color increases and decreases the color intensity of the picture. Use the front panel or IR remote control 
and 
buttons to adjust the contrast through a range of 0 to 128. At the minimum setting, 128, the switcher removes most of the color. The default setting is 64.
Tint status indicator bar
The tint adjustment is available for
The tint status indicator bar shows, and allows you to adjust, the tint setting. Tint is a relative measure of the amount of white in a given color and adjusts the picture’s color toward red or green. Use the front panel or IR remote control 
and 
buttons to adjust the tint control through a range of 0 to 128. Press the 
button to increase the green (and decrease the red). Press the 
button to increase the red (and decrease the green). The default setting is 64.
Sharpness status indicator bar
The Sharpness status indicator bar shows and allows you to adjust the sharpness setting. Sharpness uses variable filtering to affect input picture detail and definition. Use the front panel or IR remote control 
and 
buttons to increase or decrease the sharpness filtering through a range of 0 to 128. The default setting is 64.
