Operation, cont’d
Advanced screen
The Input submenu’s Advanced settings are a comprehensive set of adjustments to optimize the switcher for
The Advanced screen provides a submenu of advanced selection options: active pixels, active lines, phase, horizontal and vertical start, and total pixels. These advanced settings are rarely needed for standard video and computer video signals, but provide the user with manual control over scaling parameters that are automatic. The knowledgeable user may need to adjust these settings to optimize his or her input signal(s). Possible reasons to adjust these settings include tolerance issues and nonstandard resolutions and frequencies. The settings are described in more detail as part of the discussion on optimizing the video. See “Input submenu’s Advanced selections”, on page
To select one of the advanced settings, use the front panel or IR remote control 
or 
button to highlight the desired status indicator bar.
Input 5 selection
The Input 5 selection displays a selection box that shows the currently assigned component video format (interlaced [NTSC/PAL/SECAM], progressive [480p/576p], or HDTV [720p/1080i/1080p]) for input 5 and allows you to select a different format.
Use the front panel or IR remote control 
and 
buttons to highlight the desired component video format. Press the Enter button to change to the highlighted value. The default is progressive.
Picture submenu
Figure 3-14 is a flowchart that shows an overview of the Picture submenu, its available status indicator bars, and their available settings. Use the front panel or IR remote control 
and 
buttons to highlight the desired status indicator bar.
Menu
Timeout
No
menu 
Timeout display
Menu Menu
INPUT
Menu
Timeout
Menu
Timeout
Menu
Timeout
PICTURE
OUTPUT
AUDIO
Enter
Menu
Select
Brightness | +64 | (0 to 128) |
Contrast | +64 | (0 to 128) |
Color | +64 | (0 to 128) |
Tint | +64 | (0 to 128) |
Sharpness | +64 | (0 to 128) |
Menu
Timeout
ADVANCED
