Extron electronic IPI 100, IPI 200 manual Specifications, Part Numbers, Accessories, cont’d

Specifications, Part Numbers, Accessories, cont’d

Specifications — IPI 200 Series

Audio

Speaker	1.4" (35.6 mm), 1-way, indoor
Frequency response
Line level output	20 Hz to 3.3 kHz, ±1 dB
Speaker output	300 Hz to 3.3 kHz, -10 dB
Nominal sensitivity/IPI speaker output level
	80 dB SPL, 300 mW, 3' (1 m)
Processing
Audio format	PCM, µ-law companded
Sampling rate	8 kHz
Sample size	16 bit, µ-law companded to 8 bit
Audio latency	<100 ms

Audio input

Number/signal type	1 mono, via integrated electret microphone
Microphone gain	-30 dB to 0 dB, adjustable in 2 dB steps

N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type	2 mono: 1 via audio output port, 1 via IPI speaker
Line level output	-10 dBV (316 mVrms), balanced/unbalanced (via 3.5 mm captive screw
	connector, 3 pole)
Amplified speaker output	300 mW, continuous, 1% THD

Ethernet control interface

Ethernet control/communications port

1 female RJ-45 connector

Ethernet data rate/transport bandwidth

	80 kbps
Communications type	Half duplex
Ethernet protocol	IP (control), TCP (control), UDP (port 3121, audio), Telnet
Default settings	Link speed and duplex level: autodetected
	IP address = 192.168.254.254
	Subnet mask = 255.255.0.0
	Default gateway = 0.0.0.0
	DHCP = off
Program control	Extron control/configuration program for Windows®
	Extron Simple Instruction Set (SIS™)
	Microsoft® Internet Explorer ver. 6 or higher, Telnet

Control — relay

Number/type	1 momentary or latching (configurable)
Connector	(1) 3.5 mm captive screw connector, 2 pole, C (common) and NO (normally
	open) for configurable relay output
Contact rating	24 V, 1 A

A-4 IPI 100 and IPI 200 Series • Specifications, Part Numbers, Accessories