Extron electronic IPI 200, IPI 100 manual System Requirements, UL Requirements

System Requirements

The IP Intercom HelpDesk software is available at no charge via the Extron Web site (www.extron.com) or the DVD that comes with your IPI. To install and run IP HelpDesk, you need a PC that meets the following minimum requirements:

•Microsoft® Windows XP

•Pentium® 4, 2 GHz or faster microprocessor

•At least 512 MB RAM

•500 MB or more available hard disk space

•Windows-supported sound card, microphone, and speakers

•Microsoft Direct X version 9.0c or later

•Microsoft .NET framework, version 2.0 or later

•Network card and a network connection

INTERCOM MIC ONINTERCOM MIC ON

PUSH TO TALK

HELP	ROOM	LAB	ADMIN		PUSH TO	HELP
DESK	101		OFFICE		TALK	DESK
1	2	3	4
CONFIG			IPI 204	CONFIG		IPI 201
INTERCOM				INTERCOM
			MIC ON			MIC ON
	PUSH TO TALK
HELP	ROOM	LAB	ADMIN		PUSH TO	HELP
DESK	101		OFFICE		TALK	DESK
1	2	3	4
CONFIG			IPI 204	CONFIG
Extron			IPI 204	Extron		IPI 201

UL Requirements

WInstallation and service must be performed by authorized personnel only. This product should be used with a UL approved electrical box.

1.This unit is not to be connected to a centralized DC power source or used beyond its rated voltage range.

2.The IPI 100 AAP or IPI 200 AAP must be installed in a UL listed junction box.

The UL approved electrical wall box (junction box) is not included with the IPI; the installer is responsible for obtaining and installing the box.

3.The unit must be installed in accordance with the National Electrical Code and with local electrical codes.

IPI 100 and IPI 200 Series • Preface 1-5