Extron electronic manual Panel-to-panel mode, Tcp/Ip, IPI 100 and IPI 200 Series Installation

Models: IPI 200 IPI 100

1 86
Download 86 pages 5.51 Kb
Page 21
Image 21
Panel-to-panel mode

5.The user speaks into the intercom. Audio plays through the speakers or headset at the console the pressed button was configured to call.

6.The intercom user releases the button when done speaking.

7.The console operator clicks the Talk button (in the software) or presses the PC’s space bar to reply.

Panel-to-panel mode

You do not need to include a console PC as a permanent part of an IP Intercom

System. Here is an example in which panels are configured to “talk” to each other. The software does not need to be running during intercom system operation.

NPanel to panel mode will only work when both panels are in the same network subnet.

Connect for configuration. This connection is not needed for later operation.

Configuration Console PC

IP 10.XX.XX.01

TCP/IP

NetworkStraight-through

Network Cable

 

 

 

Classroom

 

 

 

 

Lab

 

IP 10.XX.XX.02

 

IP 10.XX.XX.03

PROJECTOR

 

 

INTERCOM

MIC ON

PROJECTOR

 

 

INTERCOM

MIC ON

ON OFF AUTO

 

 

 

 

ON OFF AUTO

 

 

 

 

IMAGE

VCR

DVD

AUX

 

IMAGE

VCR

DVD

AUX

 

 

VIDEO

LEVEL

 

VIDEO

LEVEL

VOLUME

MUTE

 

 

 

VOLUME

MUTE

 

 

 

 

LAPTOP

PC

PUSH TO

HELP

 

LAPTOP

PC

PUSH TO

HELP

 

 

 

TALK

DESK

 

 

 

TALK

DESK

 

 

 

 

IPI 101

 

 

 

 

IPI 101

MLC 226 IP

MLC 226 IP

MLC 226 IP AAP IPI 101 AAP

MLC 226 IP AAP IPI 101 AAP

1.Connect two IPI 101 AAPs and their MLC 226 IPs to a network using straight- through cable.

2.Using a PC connected to the same network (as shown in the figure above), configure the two IPI systems. Read chapter 5 for instructions on how to use the HelpDesk software for configuration.

3.Close the configuration program. The PC can be disconnected from the network or used for other functions.

4.Push the button on one IPI to contact the other IPI. On the calling IPI, the microphone is enabled, the Mic On LED lights, and the button’s light changes from low amber to bright/high amber. On the IPI being called, the button’s light changes from low amber to bright/high amber.

IPI 100 and IPI 200 Series • Installation

2-7

Page 21
Image 21
Extron electronic manual Panel-to-panel mode, Tcp/Ip, IPI 100 and IPI 200 Series Installation