![1.Remove the tub to gain access to the duct, refer section 9.6.](/images/new-backgrounds/67878/67878141x1.webp)
71
9.29Internal Duct and Elbow Removal (some integrated models only)
1.Remove the tub to gain access to the duct, refer section 9.6.
2.To remove the chassis duct tube, remove the 13mm nut to release the elbow and gently pull the tube from the elbow duct.
3.To remove the rear duct elbow, the product will need to be uninstalled and pulled forward from the joinery to gain access to the elbow. To release elbow from the chassis, squeeze the side tabs and pull outwards.
NOTE: When pulling the product forward out of the joinery, remember to feed the service and ducting pipes through the service holes to stop them from getting damaged.
4.The ducting insulated hose is attached to the rear elbow and ducted through the joinery.
NOTE: Refer to the product installation guide for more detailed installation information.
Elbow
Side Tab
Side Tabs
13mm Nut
Insulated Vent Hose