Environmental Specifications
Operating | Specifications |
|
|
Temperature | 32° to 104°F (0° to 40°C) |
|
|
Maximum altitude | No performance degradation to 10,000 feet (3,048 meters) |
|
|
Relative humidity | 5 to 85 percent, noncondensing |
|
|
Shock | Designed to meet Telcordia |
|
|
Vibration | Designed to meet Telcordia |
|
|
|
|
|
|
Temperature | |
|
|
Maximum altitude | 15,000 feet (4,572 meters) |
|
|
Relative humidity | 5 to 95 percent, noncondensing |
|
|
Vibration | Bellcore |
|
|
Agency Compliance
The E1200i is designed to comply with the following safety and agency requirements.
USA Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designated to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance to the instructions, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to take whatever measures necessary to correct the interference at their own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Force10 Networks is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications in the equipment. Unauthorized changes or modification could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Canadian Department of Communication Statement
European Union EMC Directive Conformance Statement
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Force 10 Networks can not accept responsibility for any failure to satisfy the protection requirements resulting from a
This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were derived for
94 | System Specifications |
