Fujitsu C-4120 Integrated Ergotrac Pointing Device, C A U T I O N, 3 ErgoTrac pointing device

S e c t i o n T h r e e

Once your notebook goes into Critical Low Battery Suspend mode, you will be unable to resume operation until you provide a source of power either from an AC adapter, an optional auto/airline adapter, or a charged battery. Critical Low Battery Suspend mode shows on the Status indicator just like the normal Suspend mode. Once you have provided power, you will need to press the Suspend/ Resume button to resume operation. In the Suspend mode, your data can be maintained for sometime. If a power source is not provided promptly, the Power indicator will stop flashing and go out, and you will have lost the data that was not stored.

Once you provide power, you can continue to use your notebook while an adapter is charging the battery. However, this charges the battery more slowly. If you want to charge the battery quickly, put your notebook into Suspend Mode, or turn it off while the adapter is charging the battery. (See Power Off on pages 17 for shutdown procedures.)

C A U T I O N

There is no guarantee that data will not be lost once your notebook enters the Dead Battery Suspend mode.

Cursor Control

Left Button

Right Button

INTEGRATED ERGOTRAC

POINTING DEVICE

The ErgoTrac pointing device is composed of a short, comfortable, dish-shaped pointing device and two buttons located in front of the keyboard. The ErgoTrac pointing device has the function of a mouse, and moves the cursor

Cursor

Figure 3-3 ErgoTrac pointing device

26