Fujitsu C-4120 manual Identifying The Drives, Bios Setup Utility, Drive Designators, P O I N T

L i f e B o o k C S e r i e s f r o m F u j i t s u

U s i n g Y o u r L i f e B o o k C S e r i e s

P O I N T

The BIOS setup utility is entered by pressing the F2 key during the boot process while the Fujitsu logo is on the screen.

P O I N T

When error messages occur see Section Five, pages 80-82, for help in understanding the meaning and required actions to be taken.

IDENTIFYING THE DRIVES

Your notebook uses drive letters (Example A:, B:, C:, D:, E:) to identify internal and external devices such as hard drives, floppy disk drives, CD-ROM drives and PC Cards. The most com- monly assigned drive designators are listed below. If you add other devices, the drive designators may be different. See your operating system manual for setting drive designations.

Drive Designators

A:Floppy disk drive.

Installed inside your notebook.

B:Not used with your notebook.

C:Hard drive.

Installed inside your notebook.

D:DVD/CD-ROM drive. Installed inside your notebook.

BIOS SETUP UTILITY

The BIOS setup utility is a program that sets the operating environment for your notebook. It is referred to in this publication as the setup utility. Normally, there is no need to change the environment, it is set at the factory for normal operating conditions.

The setup utility configures:

■Standard system parameters, such as date and time.

■Device control feature parameters, such as I/O addresses and boot devices.

■Power Management parameters that help to conserve your notebook’s batteries.

■System Data Security feature parameters, such as passwords.

Three

43