Fujitsu C-4120 manual See Figures 3-1 and 3-2 on pages 20-21. If

L i f e B o o k C S e r i e s f r o m F u j i t s u

T r o u b l e s h o o t i n g

Problem	Possible Cause	Possible Solution
You turn on your notebook and nothing	5. There is no battery installed and there is no	5. Use the Status Indicator panel to verify the
seems to happen (continued).	Power adapter (AC or auto/airline) installed.	presence and condition of the battery.
		(See Figures 3-1 and 3-2 on pages 20-21.)
		Install a Power adapter. If the battery is
		not charged use a Power adapter until it
		is charged.
	6. The battery is installed but is faulty	6. Use the Status Indicator panel to verify
	and there is no Power adapter (AC or auto/	the presence and condition of the battery.
	airline) installed.	(See Figures 3-1 and 3-2 on pages 20-21.) If
		a battery is indicating a short, remove that
		battery and operate from another power
		source or replace that battery.
	7. The battery is low.	7. If the battery is dead there will be a beep
		when the power is turned on and the
		notebook will immediately go into Critical
		Low Battery Suspend mode. (See pages 25-26.)
		Check the Status Indicator panel to deter-
		mine the presence and condition of the
		battery. (See Figures 3-1 and 3-2 on
		pages 20-21.)Use a Power adapter to
		operate until a battery is charged or install
		a charged battery.

Five

71