Fujitsu C-4120 manual Lithium Ion Battery, Lithium ion Battery, Warm Swapping, Section Four

Models: C-4120

1 120
Download 120 pages 31.53 Kb
Page 62
Image 62
LITHIUM ION BATTERY

S e c t i o n F o u r

SECTION FOUR

USER INSTALLABLE FEATURES

Your LifeBook C Series has a number of user installable features:

A Battery bay on the underside of your note- book allows you to replace the internal Lithium ion battery with a second one.

PC Card slots in the left side panel of your notebook allow you to install PC Cards, IC memory cards (SRAM card) or Zoomed Video cards (Slot 1 only).

A compartment under the keyboard

of your notebook allows you to install a memory upgrade module.

A microphone jack on the right side of your notebook allows you to connect a mono microphone.

A stereo line in jack on the right side of your notebook allows you to connect a sound source such as a cassette recorder.

A wireless infrared (IR) mouse receiver on the lower right side of the screen allows the use of the optional FPC IR Mouse.

A headphone jack on the right side of your notebook allows you to connect headphones or powered speakers.

A PS/2 port on the back of your notebook allows you to connect an external mouse, keyboard or numeric keypad.

A USB port in the back of your notebook allows you to connect a Universal Serial Bus device.

An Modem (RJ-11) jack on the right side of your notebook allows you to connect a telephone line to the internal modem.

A serial port in the back of your notebook allows you to connect serial devices, such as RS-232C pointing devices or modems.

A parallel port in the back of your notebook allows you to connect a parallel printer, photo or text scanner, etc.

An external monitor port in the back of your notebook allows you to connect an external monitor.

This section describes how to install and remove equipment for each of the expansion features.

LITHIUM ION BATTERY

Lithium ion Battery

Your Lithium ion battery is durable and long lasting but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.

Warm Swapping

Your C Series notebook comes equipped with a bridge battery. A bridge battery allows a charged Lithium ion battery to be exchanged for a discharged one by "warm-swapping".

To warm-swap, have a charged battery ready to install, put your notebook in Suspend mode, remove the low battery and quickly insert the charged battery. The bridge battery capacity is not large, and can vary with the condition of your notebook, so you will have 3 minutes at the most to make the change.

Batteries can, of course, also be "cold-swapped", i.e. with the notebook powered off and the AC adapter disconnected. In this case there is no time limit.

48

Page 62
Image 62
Fujitsu C-4120 manual Lithium Ion Battery, Lithium ion Battery, Warm Swapping, Section Four, User Installable Features