Fujitsu C-4120 manual Type PHDISK /DELETE /FILE, C A U T I O N

S e c t i o n T h r e e

To remove all space allocation for the Save-to- Disk function, do the following:

1.Click on Start.

2.Click on Shut Down.

3.From the Shut Down menu select the restart option.

4.When the Fujitsu Logo appears on your screen press F8 immediately, before the Windows 98 banner appears on the screen.

5.Select 6. Safe mode command prompt only, then press Enter.

6.At the c:\> prompt, type cd fujitsu, then press Enter.

7.Type PHDISK /DELETE /FILE

Press the Enter key.

The utility will remove the space allocation for the Save-to-Disk function and free that space for other use.

If you have just installed a new Memory Upgrade Module, or have a read or write error while going into Save-to-Disk mode, you will need to reset your Save-to-Disk parameters.

To reset the Save-to Disk parameters, use the procedure below.

Resetting the Save-to-Disk Parameters:

1.Click on Start.

2.Click on Shut Down.

3.From the Shut Down menu select the restart option.

4.When the Fujitsu Logo appears on your screen press F8 immediately, before the Windows 98 banner appears on the screen.

5.Select 6. Safe mode command prompt only, then press Enter.

6.At the c:\> prompt, type cd fujitsu, then press Enter.

7.At the c:\>fujitsu prompt, type phdisk / delete / file, then press Enter.

8.The press any key to restart the computer.

9.When the Fujitsu Logo appears on your screen press F8 immediately, before the Windows 98 banner appears on the screen.

10At the c:\> prompt, type cd fujitsu, then press Enter.

11.At the c:\fujitsu prompt, type phdisk / create / file, the press Enter.

12.The press any key to restart the computer.

C A U T I O N

Never use PARTITION in place of FILE with the PHDISK Utility or you will reformat your internal hard drive and all data, applications and operating system will be destroyed.

46