Fujitsu MHU2100AT manual Installation Conditions, Theory of Device Operation

Contents

CHAPTER 3	Installation Conditions		3-1
3.1	Dimensions		3-2
3.2	Mounting		3-3
3.3	Cable Connections		3-9
	3.3.1	Device connector	3-9
	3.3.2	Cable connector specifications	3-10
	3.3.3	Device connection	3-10
	3.3.4 Power supply connector (CN1)		3-11
3.4	Jumper Settings		3-11
	3.4.1	Location of setting jumpers	3-11
	3.4.2	Factory default setting	3-12
	3.4.3	Master drive-slave drive setting	3-12
	3.4.4	CSEL setting	3-13
	3.4.5	Power Up in Standby setting	3-14
CHAPTER 4	Theory of Device Operation		4-1
4.1	Outline		4-2
4.2	Subassemblies		4-2
	4.2.1	Disk	4-2
	4.2.2	Spindle	4-2
	4.2.3	Actuator	4-2
	4.2.4	Air filter	4-3
4.3	Circuit Configuration		4-3
4.4	Power-on Sequence		4-6
4.5	Self-calibration		4-7
	4.5.1	Self-calibration contents	4-7
	4.5.2	Execution timing of self-calibration	4-8
	4.5.3	Command processing during self-calibration	4-8
4.6	Read/write Circuit		4-9
	4.6.1	Read/write preamplifier (PreAMP)	4-9

x C141-E202-01EN