Fujitsu MHU2100AT manual Execution example of Read Multiple command

		Contents
Figure 5.2	Execution example of READ MULTIPLE command	.....................5-63
Figure 5.3	Read Sector(s) command protocol	5-127
Figure 5.4	Protocol for command abort	5-128
Figure 5.5	WRITE SECTOR(S) command protocol	5-130
Figure 5.6	Protocol for the command execution without data
	transfer	5-132
Figure 5.7	Normal DMA data transfer	5-133
Figure 5.8	Ultra DMA termination with pull-up or pull-down	5-145
Figure 5.9	PIO data transfer timing	5-146
Figure 5.10 Multiword DMA data transfer timing (mode 2)		5-147
Figure 5.11	Initiating an Ultra DMA data in burst	5-148
Figure 5.12	Sustained Ultra DMA data in burst	5-152
Figure 5.13	Host pausing an Ultra DMA data in burst	5-153
Figure 5.14	Device terminating an Ultra DMA data in burst	5-154
Figure 5.15	Host terminating an Ultra DMA data in burst	5-155
Figure 5.16	Initiating an Ultra DMA data out burst	5-156
Figure 5.17	Sustained Ultra DMA data out burst	5-157
Figure 5.18	Device pausing an Ultra DMA data out burst	5-158
Figure 5.19	Host terminating an Ultra DMA data out burst	5-159
Figure 5.20	Device terminating an Ultra DMA data out burst	5-160
Figure 5.21	Power-on Reset Timing	5-161
Figure 6.1	Response to power-on	6-3
Figure 6.2	Response to hardware reset	6-4
Figure 6.3	Response to software reset	6-5
Figure 6.4	Response to diagnostic command	6-6
Figure 6.5	Sector slip processing	6-10
Figure 6.6	Automatic alternating processing	6-11
Figure 6.7	Data buffer structure	6-12

C141-E202-01EN xvii