*9
Bit | Description |
0If this bit is set to 1, it indicates SMART EXECUTE
1Vendor unique
2If this bit is set to 1, it indicates
3If this bit is set to 1, it indicates SMART
4If this bit is set to 1, it indicates SMART Self Test is supported.
5 to 7 | Reserved bits |
*10 SMART capability flag
Bit | Description |
0If this bit is set to 1, it indicates the attribute data is saved to the media before the drive enters power save mode.
1If this bit is set to 1, it indicates the device saves the attribute automatically according to fixed operation.
Reserved bits |
*11 Drive error logging capability [172h]
Bit | Description |
0If this bit is set to 1, it indicates the drive error logging is supported.
1 to 15 | Reserved bits |
*12 Quick Test completion time [minutes]
This value indicates the processing time of the Quick Test
*13 Comprehensive Test completion time [minutes]
This value indicates the processing time of the Comprehensive Test
*14 Check sum
Twos complement of the lower byte, obtained by adding
5 - 58 |
|