Fujitsu MPG3XXXAH-E manual Information to be read by Identify Device command 3

Table 5.5 Information to be read by IDENTIFY DEVICE command (3 of 6)

*1	Word 0: General configuration
	Bit 15: 0 = ATA device		0
	Bit 14-8: Vendor specific
	Bit 7: 1	= Removable media device	0
	Bit 6: 1	= not removable controller and/or device	1
	Bit 5-1: Vendor specific
	Bit 0: Reserved		0
*2	Number of Cylinders, *3 Number of Heads,

*11 Total number of user addressable sectors (LBA mode only.)

	MPG3204AH-E	MPG3307AH-E	MPG3409AH-E
*2		X‘3FFF’
*3		X‘10’
*11	X‘262D5E01’	X‘3943CE0’	X‘4C5ABC0’

*4 Word 10-19: Serial number; ASCII code (20 characters, right-justified)

*5 Word 23-26: Firmware revision; ASCII code (8 characters, Left-justified)

*6 Word 27-46: Model number;

ASCII code (40 characters, Left-justified), remainder filled with blank code (X'20') One of the following model numbers;

Fujitsu MPG3204AH-E

Fujitsu MPG3307AH-E

Fujitsu MPG3409AH-E

*7	Word 49:	Capabilities
	Bit 15-14:	Reserved
	Bit 13:	Standby timer value 0 = Standby timer values shall be managed by the device
	Bit 12:	Reserved
	Bit 11:	IORDY support	1=Supported
	Bit 10:	IORDY inhibition 0=Disable inhibition
	Bit 9:	LBA support	1=Supported
	Bit 8:	DMA support	1=Supported
	Bit 7-0:	Vendor specific
*8	Word 51: PIO data transfer mode
	Bit 15-8:	PIO data transfer mode	X'02'=PIO mode 2
	Bit 7-0:	Vendor specific
*9	Word 53: Enable/disable setting of word 54-58, 64-70 and 88
	Bit 15-3:	Reserved
	Bit 2:	Enable/disable setting of word 88		1=Enable
	Bit 1:	Enable/disable setting of word 64-70		1=Enable
	Bit 0:	Enable/disable setting of word 54-58		1=Enable
*10	Word 59: Transfer sector count currently set by READ/WRITE MULTIPLE command
	Bit 15-9:	Reserved
	Bit 8:	Multiple sector transfer		1=Enable
	Bit 7-0:	Transfer sector count currently set by READ/WRITE MULTIPLE without
		interrupt supports 2, 4, 8 and 16 sectors.

C141-E116-01EN 5 - 31