Fujitsu MPG3XXXAH-E manual Information to be read by Identify Device command 4, ATA-1

Table 5.5		Information to be read by IDENTIFY DEVICE command (4 of 6)
*12 Word 63: Multiword DMA transfer mode
Bit 15-11:	Reserved
Bit 10:	1	= Multiword DMA mode 2 is selected
	0	= Multiword DMA mode 2 is not selected
Bit 9:	1	= Multiword DMA mode 1 is selected
	0	= Multiword DMA mode 1 is not selected
Bit 8:	1	= Multiword DMA mode 0 is selected
	0	= Multiword DMA mode 0 is not selected
Bit 7-3:	Reserved
Bit 2:	1	= Multiword DMA mode 2 and below are supported
Bit 1:	1	= Multiword DMA mode 1 and below are supported
Bit 0:	1	= Multiword DMA mode 0 is supported
*13 Word 64: Advance PIO transfer mode support status
Bit 15-8:	Reserved
Bit 7-0:	Advance PIO transfer mode
Bit 1=1	Mode 4
Bit 0=1	Mode 3
*14 Word 80: Major version number
Bit 15-5:	Reserved
Bit 5:	ATA-5		Supported=1
Bit 4:	ATA-4		Supported=1
Bit 3:	ATA-3		Supported=1
Bit 2:	ATA-2		Supported=1
Bit 1:	ATA-1		Supported=1
Bit 0:	Undefined
*15 Word 82: Support of command sets
Bit 15:	Reserved
Bit 14:	NOP command supported = 0
Bit 13:	Read Buffer command supported = 1
Bit 12:	Write Buffer command supported = 1
Bit 11:	Write Verify command supported (Old Spec.) = 0
Bit 10:	Host Protected Area feature command supported = 1
Bit 9:	Device Reset command supported = 0
Bit 8:	SERVICE Interrupt supported = 0
Bit 7:	Release Interrupt supported = 0
Bit 6:	Lock Ahead supported = 1
Bit 5:	Write-cache supported = 1
Bit 4:	Packet command feature set supported = 0
Bit 3:	Power Management feature set supported=1
Bit 2:	Removable feature set supported=0
Bit 1:	Security feature set supported=1
Bit 0:	SMART feature set supported=1
*16 Word 83: Support of command sets
Bit 15:	0
Bit 14:	1
Bit 13-10:	Reserved
Bit 9:	Automatic Acoustic Management supported=1
Bit 8:	SET MAX security extension supported=1
Bit 7:	Reserved
Bit 6:	SET FEATURES subcommand required to spinup after power-up supported=0
Bit 5:	Power-Up In Standby feature set supported=0

5 - 32 C141-E116-01EN