3.3Mounting
(1)Direction
Figure 3.3 illustrates normal direction for the disk drive. The disk drives can be mounted in any direction.
Horizontal mounting with the PCB facing down
Figure 3.3 Direction
(2)Frame
The disk enclosure (DE) body is connected to signal ground (SG) and the mounting frame is also connected to signal ground. These are electrically shorted.
Note:
Use
(3)Limitation of
When the disk drive is mounted using the screw holes on both side of the disk drive, use two screw holes shown in Figure 3.4.
Do not use the center hole. For screw length, see Figure 3.5.
3 - 4 |
|
