Furuno FAR-2107 specifications Cursor Data Display

10.Use the EBL offset feature to anchor the net cursor at net origin point.

1)Push the EBL OFFSET key.

2)Use the trackball to set net origin point.

3)Press the EBL OFFSET key to anchor the net cursor.

11.Steer the vessel so your ship’s trail runs along the net cursor then throw the net.

2.3Cursor Data Display

The cursor data box, which is located at the top right corner on the screen, can show latitude and longitude position of the cursor, X- and Y-coordinates, and range and bearing from your ship to the cursor. Further, if set and drift corrections are disabled, two cursor data boxes may be shown, to display two sets of position information.

Left-click the cursor data box successively to change cursor data in the sequence shown below.

+36°23.693 N

138°31.377 E

+0.280 NM

0.374 NM

TTG to cursor position

00:01 036.7°T

+0.466 NM

Latitude and longitude

X-coordinate

(Starboard: plus, Port: minus)

X-Y coordinate

Y-coordinate (bow)

(Upward: plus, Downward: minus)

Range and bearing from own ship

11