Furuno FAR-2107 specifications Erasing track with the cursor, Selecting erasure method

Erasing track with the cursor

You may erase your ship’s track or any target’s track directly on the screen, by two points or area. Select the erasure method then erase track.

Desired location

	x: Specified point
Erase track between two points	Erase track within a specific range

Selecting erasure method

Select the erasure method for own track and target track as follows:

1.Left-click the MENU box.

2.Select 5 [PLOTTER] then push the left button.

3.Select 8 [DATA ERASE] then push the left button.

[DATA ERASE]

1BACK

2OWN TRACK RED/GRN/BLU/YEL/ CYA/MAG/WHT/ 30%/50%/80%/ALL

3TARGET TRACK RED/GRN/BLU/YEL/ CYA/MAG/WHT/ 30%/50%/80%/ALL

4MARK ALL ERASE NO/YES

5WPT ALL ERASE NO/YES

6NAV LINE ALL ERASE NO/YES

7OWN TRACK DELETE 2POINTS/AREA

8TARGET TRACK DELETE 2POINTS/AREA

4.Select 7 OWN TRACK DELETE or 8 TARGET TRACK DELETE then push the left button.

5.Select 2POINTS or AREA as appropriate then push the left button. 2POINTS:Erase track between two points.

AREA: Erase all track within an area.

6. Push the right button three times to close the menu.

39