Furuno FAR-2107 specifications Auto Target Track status and track color

AUTO TARGET TRACK status and track color

	AUTO TARGET TRACK "ON"	AUTO TARGET TRACK "OFF"
ALL	When track is drawn	When track is drawn
	When a target is acquired its track is	Manually acquire a target. The track of a
	drawn in the color specified.	manually acquired target is drawn in the
		color specified if the target selected by
		using the TARGET TRACK ON* feature.
	When color is changed	When color is changed
	The color of all track is changed at the	The color of all track is changed at the
	moment new color is selected.	moment new color is selected.
INDIVIDUAL	When track is drawn	When track is drawn
	When a target is acquired it is drawn in	Manually acquire a target. The track of a
	the color specified. To change track color	manually acquired target is drawn in the
	for individual target, select a different	color specified if the target selected by the
	color and acquire the target.	TARGET TRACK ON* feature. To change
		track color of individual target and acquire
		the target by using the TARGET TRACK
		ON* feature.
	When color is changed	When color is changed
	Current track is not affected when color	Current track is not affected when color is
	is changed. To change track color, select	changed. To change track color, select
	color desired and cancel tracking of	desired color and turn off the track of the
	target. Reacquire the target, and its track	target by using the TARGET TRACK
	is then drawn in the color specified.	OFF* feature. Select the target by using
	Note: When 5 AUTO TARGET TRACK is	the TARGET TRACK ON feature, and the
		target’s track is drawn in the color speci-
	switched from ON to OFF, track display is	fied.
	turned off from the moment of switching.
	If AUTO TARGET TRACK is again
	switched ON when INDIVIDUAL is
	active, the tracks of all targets (1-15) are
	displayed in the color specified.

*: You can switch between TARGET TRACK ON (display target tracks) and TARGET TRACK OFF (don’t display target tracks) as follows:

1.Place the cursor inside the effective display area.

2.Spin the scrollwheel to show TARGET TRACK ON or TARGET TRACK OFF at the bottom of the screen.

TARGET	EXIT	TARGET	EXIT
TRACK ON		TRACK OFF

3.Put the cursor on the track that you want to display (or turn off) then push the left button.

4.Push the right button to finish.

38