2.Remove two upset screws, detach the plugs J503, J502, J501, J504, J506 and J507, thus pull out the power block.
| Protection sheet | |
VH4P | Spacer | |
| ||
Power supply |
| Detach J503, J502, |
VH5P | J501, J504 and | |
pcb | J506. | |
Upset screws | Power Block | |
| ||
M5x25 SUS 2 pcs. |
| |
Pin
Hole
Detach J507.
3.Fix the power supply pcb (supplied) to the power block with spacers (supplied).
4.Connect two VH connectors (provided on the power block) to the power supply pcb.
5.Put protection sheet (supplied) on the power supply pcb and fasten it with four screws.
6.Reattach the power block.
