![](/images/new-backgrounds/1199163/19916369x1.webp)
2.3.3How to connect cables to the monitor unit
Connect the monitor cable and control cable to the monitor
1.Unfasten four screws (M4x10) at the rear of the monitor to loosen the cable cover.
2.Lift and pull the cable cover to remove it.
3.Unfasten two screws (M4x10) to remove the clamp cover.
4.Lay the monitor and control cables on the clamp, and then reattach the clamp plate to fix cables.
5.Connect eight connectors referring to the instruction sticker by the connector board.
6.Reattach the cable cover.
Connector board
3 |
| B | 2 | G | 1 R | |||||
|
|
| ||||||||
5 | H | 4 | V | |||||||
| PROCESSOR UNIT |
| ||||||||
| CONTROL UNIT |
|
|
| PROCESSOR | UNIT |
|
|
| |
|
|
|
|
|
|
|
Monitor cable
Control cable
Clamp
Cable cover
Monitor unit, rear view