Gateway E4350 manual Example router-based Ethernet network

Introduction to Networking

Example router-based Ethernet network

The following is an example of an Ethernet network. The network is made up of a router, a cable or DSL modem, your computers, and cables connecting each of these components. The router is the central control point for the network. Attached to the router are all of your computers or Ethernet-ready devices. Also connected to the router is a cable or DSL modem that provides access to the Internet.

Cable/DSL modem

Router

Tips & Tricks

To add the ability to access a wireless Ethernet network to your wired Ethernet network, connect an access point to the router or use a router that has a built-in access point, such as the Linksys wireless access point router with 4-port switch.

Equipment you need for a router-based Ethernet network

For an Ethernet network you need:

■Two or more computers with Ethernet jacks

■One router

■One broadband Internet connection (optional)

■Ethernet cables connecting all of the network equipment

www.gateway.com 73