GE manual Vertical Drilling Motor, Type GE752, GEK±91584D, Model Differences

	Vertical Drilling Motor, Type GE752, GEK±91584D
	TABLE 1. MODEL DIFFERENCES
Motor	Model Differences	Superseded By
752UP1	This is a shunt motor with the following distinctions:
	± Has internal greasing tubes for both drive end (pinion end)
	and commutator±end bearings
	± Has a double±ended shaft.
752UP2	Same as UP1 except:
	± Has armored cable
	± Has no grease tubes at commutator end
Motor	Model Differences	Superseded By
752UP3	Same as UP2 except:
	± Has a single grease tube at drive end which is part of the
	framehead/bearing assembly for ease of armature
	disassembly.
752UP3A	Same as UP3 except:
	± Has class H Kapton wrapped exciting coils
752UP4	Same as UP3A except:
	± Has an ABS certified shaft.
752UP5	Same as UP3A except:
	± Has a thermal sensor embedded in each of its exciting and
	commutating coils.
752UP6	Same as UP3A except:
	± Has an improved commutator±end bearing assembly and an
	ABS±certified armature shaft.
752US1	This is a shunt motor with the following distinctions:
	± Same as UP3 except:
	± Has an AG type armature with an AF commutator and
	a standard AUP flash ring.
	± Has AG type commutating coils and poles with brazed
	instead of bolted connections.
	± Has air vents in the drive±end framehead
	± Has a frame specially machined for mounting the
	customer gearbox at the drive end.
	± Has a different drive±end grease arrangement.
	± Has rubber hardtop brushes instead of regular duplex
	brushes.
752US2	Same as US1 except:
	± Has an improved commutator±end bearing assembly and an
	ABS±certified armature shaft.
752AUP1	This is a series motor with the following distinctions:
	± Has internal greasing tubes for both drive end and
	commutator±end bearings
	± Has a double±ended shaft.
752AUP2	Same as AUP1 except:
	± Has armored cable
	± Has no grease tubes at commutator end
	± Mounting feet have dowel holes for vertical mounting.

3