GEK±91584D, Vertical Drilling Motor, Type GE752
16,21
19
18
2
NOT INCLUDED ON ALL MODELS
14 ASSEMBLED TO EITHER P13 OR P17, DEPENDING ON MODEL.
13 NOT INCLUDED ON ALL MODELS
12 NOT INCLUDED ON ALL MODELS
APPLY P15 TO THREADS
AT BOTH ENDS OF P12
17
2
20USE IF NECESSARY TO ADJUST FOR PROPER
4,5 | ASSEMBLY OF PARTS |
24
USE 4.8 OZ. OF
P7 IN EACH CAVITY
23
SMEAR .5 OZ. OF
P7 ON SEALS
17, 18 AND 19 |
3TORQUE TO 110±120 FT. LBS.
22FILL BEARING COMPLETELY WITH 29 OZ. OF P7
6
MODELS
SEE TABLE 2, PAGE 20
REF. | DESCRIPTION | REF. | DESCRIPTION |
1 | FRAME HEAD | 15 | LOCK±TITE 497A806P36 |
2 | GASKET | 16 | FRAME HEAD |
3 | BEARING CAP | 17 | FITTING 90 ELBOW |
4 | LOCKWASHER 5/8 N405P47P | 18 | FITTING 90 ELBOW |
5 | BOLT 5/8±11 X 3 1/2 N22P33056 | 19 | FITTING BULKHEAD |
6 | SLEEVE | 20 | WASHER 9/16 N402P46B13 |
7 | GREASE | 21 | FRAME HEAD |
12 | PIPE 1/4 X 6 IN. | 22 | ROLLER BEARING |
13 | COUPLING 1/4 NPT | 23 | BEARING CAP |
14 | PIPE PLUG 1/4 N5700P31 | 24 | FLINGER |
FIG. 36. DRIVE±END BEARING ASSEMBLY (41B537821, CHG. B). E±37952B
60
