GE manual DRIVE±END BEARING ASSEMBLY. E±18166E, GEK±91584D, Vertical Drilling Motor, Type GE752

GEK±91584D, Vertical Drilling Motor, Type GE752

SMEAR 0.50 OZ. OF	MODELS
GREASE
	SEE TABLE 2, PAGE 20
ON GREASE SEALS.

FIG. 34. DRIVE±END BEARING ASSEMBLY. E±18166E.

NOTE: Do not heat the bearing and housing as- sembly above 100￿ C (212￿ F). Higher tempera- tures may cause the oil to ªbleedº from the grease.

7.Heat spacer (9) to 110￿ C (230￿ F) and shrink it onto the shaft tight against the inner race of ball bearing (3).

58