GE GE752 manual ARMATURE INSULATION 41D731545 CHG. F. E±18156A

GEK±91584D, Vertical Drilling Motor, Type GE752

1±1/16	+	1/16	5 REQ'D.	38 SEE NOTE
	±

2±5/8	+1/8
	±0	39
		27

39

12	18,19,20,75	4±7/8 MAX.
		25

11

4

114 15

62

3

55

NOTE FOR TEMPORARY BINDING:

APPLY TEMPORARY BINDING. 6 TOTAL PASSES WITH 0.102 DIAM. B4Y19B AT 800 LB. TENSION. BAKE IN A 150 C OVEN FOR 4 HOURS.

FIRST TURN 2ND DECK

26PT26 TO BE APPLIED OVER COILS TO LEVEL THE SURFACE

12 SATURATE P2 THOROUGHLY WITH P56

A		A
LAST TURN
3RD DECK
		TOP BAND
B
FIRST TURN
(LOWER DECK)
		LAST TURN
	28	(LOWER DECK)
LAST TURN		SECTION A±A
3RD DECK		41
	28

SECTION B±B

272ND AND 3RD DECK CONTINUOUS WIRE

NOTE FOR P38 (P.E. BINDING):

APPLY THE P38 PERMANET BINDING.
APPLY 37 ACTIVE TURNS OF P38 AT 650 20 LB. TENSION+
AS THE 1ST DECK.	±
APPLY 35 ACTIVE TURNS OF P38 AT 600 20 LB. TENSION+
AS THE 2ND DECK.	±

	REF.	DESCRIPTION	REF.	DESCRIPTION
	1	HEAD INSUL. P.E.	40	BINDING CLIP
	2	HEAD INSUL. P.E.	41	TIE CLIP
	3	FILLER	42	METHOD OF FASTENING
	4	ARMATURE COIL		BINDING WIRE (P.E.)
	5	INSUL. OVER EQUALIZERS	43	METHOD OF SWAGING
	6	INSUL. IN EQUALIZER LOOP		COMM. RISERS
	7	INSUL. OVER EQUALIZER	44	CORE INSUL.
	8	EQUALIZER	45	WINDING INSUL.
	9	HEAD INSUL. C E	46	BINDING AND BINDING INSUL.
	10	SLOT STRIP BOT	47	IDENTIFICATION PRINT
	11	U PIECE AT SLOT ENDS	48	BINDING BASE
	12	SLOT WEDGE	49	JOINT INSUL.
B	13	WINDING INSUL. C E	50	PAD
	14	INSUL. IN LOOP P.E.	51	SLOT WEDGE
	15	INSUL. IN LOOP	52	SLOT STRIP BOTTOM
	16	FILLER STRIP	53	TAPE
	17	FILLER	54	TEFLON BAND
	18	SLOT STRIP (UNDER WEDGE)	55	TEFLON GLASS TAPE
	19	FILLER STRIP	56	VARNISH
	20	FILLER STRIP	57	TEFLON BAND
	21	SLOT STRIP CENTER	58	EQUALIZER
	22	RADIUS SPACER C.E. TOP	59	FILLER FOR COMM.
		AND BOTTOM		STRING BAND
	23	BINDER OVER COMM. MICA	60	BINDING BASE
	24	SEAL OVER COMM.	61	MYLAR TAPE
		MICA AND STRING BAND	62	CEMENT
	25	BINDING INSUL. P.E.	63	CEMENT
	26	FILLER P.E.	64	CORE INSUL.
	27	BINDING BASE	65	HEAD INSUL.
	28	TIE CLIP	66	INSUL. IN EQUALIZER LOOP
	29	RADIUS SPACER (C.E. BOTT.)	67	BAND FOR EQUALIZERS
	30	DIAGRAM	68	INSUL. OVER EQUALIZERS
	31	SHIM (IN RISER SLOT)	69	INSUL. OVER EQUALIZERS
	32	FILLER PUTTY	70	FILLER
	33	WINDING INSUL. C.E.	71	FILLER
	34	FILLER FOR COMM.	72	WINDING INSULATION
		STRING BAND	73	ASBESTOS ROPE
	35	FILLER FOR COMM.	74	ARMATURE COIL
		STRING BAND	75	FILLER STRIP
	36	BINDING BASE	76	SLOT STRIP BOTTOM
	37	BANDING	77	BINDING BASE
	38	BINDING WIRE	78	BINDING BASE
	39	BINDING CLIP P.E.

APPLY 34 ACTIVE TURNS OF P38 AT 550 20 LB. TENSION+
AS THE 3RD DECK	±
THE 2ND AND 3RD DECK MUST BE A CONTINUOUS BAND.

FIG. 19. ARMATURE INSULATION (41D731545 CHG. F). E±18156A.

34