GE PT878 user manual Entering the Meter Menu, Units

Chapter 6. Programming Meter Settings

6.1 Entering the Meter Menu

To enter the Meter Menu, press the [MENU] key at the lower right of the PT878 keypad. The Main Menu replaces the Status Bar at the top of the screen. Press the [X] arrow key twice to scroll from the Site Menu to the Meter Menu. At the Meter Menu, press [ENTER]. The screen appears similar to Figure 76 below. While programming, refer to Figure 140 on page 223 of Appendix A, Menu Maps.

Site Program			Meter	Logging		Service
Velocity,			Units			Signal, dB
	ft/s
			Battery			32
Units			Date/Time
			Locale
0.00Contrast
			Backlight
		nsCommunicationLanguage
Delta-T,						Volume, l/s
			Totals		X
0.10						0.0
			User Tables
			√Snapshot
E0: No Errors

Figure 76: Meter Menu

To scroll to a particular option, press the [T] or [S] arrow keys until you reach the option. Then press [ENTER] to open the option window.

When entering parameters in an option, press:

•The [T] key to step through the available parameters

•The [S] key to scroll back to a previously entered parameter

•The [F2] key (Cancel) or the [ESC] key to exit an option at any time and return to Operate Mode without changing the parameters.

112 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual