Chapter 7. Logging Data
146 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
7.4.1 Stopping (Pausing) a Log
To stop a log that is currently pending or running,
1. First, select the log you wish to pause in the Log Manager (shown in
Figure 89 on page 133).
2. Then open the Log Menu, scroll to the Pause option, and press
[ENTER].
The PT878 returns to the Log Manager, which displays the highlighted log
with “Paused” in the State line.
7.4.2 Restarting a Log
To restart a paused log:
1. First, select the log you wish to restart in the Log Manager (shown in
Figure 89 on page 133).
2. Then open the Log Menu, scroll to the Start option, and press [ENTER].
The PT878 returns to the Log Manager, which displays the highlighted log
with a status of “Pending” or “Running.”
7.4.3 Ending a Log
To end a log:
1. First, select the log you wish to end in the Log Manager (shown in
Figure 89 on page 133).
2. Then open the Log Menu, scroll to the End option, and press [ENTER].
The PT878 returns to the Log Manager, which displays the highlighted log
with a status of “Finished.” The space not used by the finished log is freed
for reuse.
Note: You cannot restart a finished log. You must create a new log with the
same parameters.