GE PT878 user manual 650.0, Changing Communications Settings

Chapter 6. Programming Meter Settings

6.8Changing the Display Language (cont.)

The meter restarts in Operate Mode in the desired language. Figure 82 below illustrates a French version of the display shown in Figure 58 on page 92.

ABC.SIT			2000/11/30		09:53 AM
Vitesse, m/s				Gain, dB
5000		-1.5121			-6
-5000
			-30		3
	10	0.4

Delta-T, ns Gain, dBVolume, l/s

-1.650.0

E2: Vitesse saine

Figure 82: French Version of Typical Display

Note: The PT878 defaults to US English. However, one or more alternate languages can be installed at any time. Consult your GE representative or www.gesensing.com for available languages.

6.9 Changing Communications Settings

On occasion, you might need to change the parameters by which the PT878 communicates with a PC over the wireless infrared interface. While programming, see Figure 153 on page 237 of Appendix A, Menu Maps. To check or change these parameters:

Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 123